Announcements

Over the last couple years the priorities in my life have changed. Had Matrix Garage grown big enough to hire enough employees and leave them to running it while I pursued other things I would have happily taken that route but it has generally stayed just big enough to keep me working overtime. 
I have decided to start focusing my carreer and passions elsewhere and that means that supporting the AW, AE, 4A and related communities has had to be moved much lower on the priority list. I have decided to keep the store up to provide parts that only we offer, or other things that are hard to come by elsewhere. You will notice many big name, readily available products have been taken down and we will continue to do so. It's just not worth our time trying to compete with the big corporations selling at cutthroat prices and it just takes up more of my time. 
I will try to keep providing those parts that we make or that we have developed and sell as a service to the community but understand that now this is something I do in my spare time because I don't want to leave people hanging. 
I try to make shipments and process orders at least twice a week. If you want Amazon next day shipping buy from Amazon. I will do my best to keep order time and customer service at a reasonable level but have some understanding. I am not making money on this and it takes away from my other work and other issues that are very important to me right now. 
I have always wanted to make our designs and other information open source and available to the community but to do so properly would take a lot of time making sure that models and drawings were complete, accurate, or properly described. To go through everything and make sure it was something that I felt comfortable releasing to the community. I would love to find someone who was willing to help me do this. Someone in engineering school or passionate about this to help go through 3D scans, CAD designs, and information to prepare it. If you are interested feel free to email me. 


 

 


 

MegaSquirtPNP G2 T8590 for the 85-89 Toyota 4AGE and 22RE

$799.00

MegaSquirtPNP Gen 2

Plug-N-Play Standalone Engine Management System

 

MegaSquirtPNP Model #T8590 Features

Fits several Toyota applications, all USDM with manual transmission:

  • 1985-1987 Toyota Corolla AE86 with 4AGE
  • 1985-1989 Toyota MR2 with 4AGE
  • 1987-1989 Toyota Corolla FWD models with 4AGE
  • 1985-1990 Toyota Pickup or 4Runner with 22RE

Please note that this one does not match the pinout for JDM 4AGE motors with factory MAP sensor.

New second generation MSPNP!

We've totally redesigned the MSPNP! This new second generation unit runs MS2/Extra sequential code, using the MicroSquirt Module and a lot of new MSPNP-specific hardware. We've added several major improvements over the original. Here's the features of the new model.

Easy to Use and Install!    

  • Fully Plug and Play Installation - No wiring required for basic functionality.  Average install time is under 1 hour!
  • 4AGE base map is pre-loaded to help your engine start on the first turn of the key (other model base maps included on CD)
  • Real time tuning and data logging with a laptop connection
  • Supports most aftermarket wideband sensors

Fully Tunable Engine Control!     

  • 16x16 Fuel Tables allow high resolution tuning
  • 12x12 Ignition Tables
  • Multiple Acceleration enrichment strategies
  • Closed Loop Idle Speed Control
  • Air Conditioner Control
  • Up to 4 sequential fuel injector channels with individual trim tables (minor wiring change required to run sequential, 4AGE only)
  • Onboard peak and hold drivers support both high and low impedance injectors - No external ballast resistor is needed!
  • Allows removal of stock airflow meter

Advanced Feature Set (Included!)

  • 12x12 Air Fuel Ratio Target Tables for use with wide band O2 sensor for precise tuning and table trim.
  • Built-in 2-step rev limiter / launch control with flat shift
  • Real time barometric correction
  • Internal 4-bar MAP sensor reads up to 44PSI of boost
  • Overboost protection
  • Closed loop boost control (Requires DIYAutoTune.com EBC solenoid kit)
  • Knock sensor input with adjustable sensitivity
  • Headphone output for knock sensor - listen for knock while you tune!
  • Table switching input. Change fuel and spark maps on the fly for different fuels, nitrous activation, etc.
  • Input for flex fuel sensor - switch between E85 and gasoline on the fly!
  • CANBus connector allows interconnection of other MegaSquirt-compatible devices for additional functions (EGT Input, Automatic Transmission Controller, Additional Sensors.....the possibilities are limitless!

 

What you get in the box:

  • MegaSquirtPNP T8590 ECU

  • MSPNP RS232 serial tuning cable, 6' (USB adapter sold separately, if needed)

  • Tuning Software and Documentation CD

  • 6' Vacuum Hose for MAP Signal and 'T' fitting

  • Four Screws for ECU mounting

Note that although there is a paid upgrade to TunerStudio, it is not needed to tune this ECU. The free version included on the CD can access all the features and tables of the MegaSquirtPNP. The paid version of TunerStudio simply adds tuning and analysis software, such as VE Analyzer Live to tune the fuel tables based on wideband O2 feedback (requiring a wideband O2 sensor and controller, sold separately).

Image: 
List price: $0.00
Price: $799.00
Weight: 2 lb
Dimensions: 6 in × 6 in × 4 in

courtesy of webmatter.de